Drip Irrigation Systems are extremely in demand in the market for their high efficiency. We are not only considered among the prominent Suppliers in India, but we are rated among the Subsurface Drip Irrigation Systems Exporters in the international market. The different components of the Drip Irrigation Systems are discussed below.

Emitting Device

Manufactured from Virgin Plastic

Silicon Rubber Diaphragm

Factory sealed & compact

UV Stabilized

No environmental effect

Wide Operation Range,

An emitter is also called a dripper and is used to transfer water from a pipe or tube to the area that is to be irrigated. Typical emitter flow rates are from 0.16 to 4.0 US gallons per hour (0.6 to 16 L/h).

Keep the properties as it and reduce the space between each property. And add following:

Drip Tape
Drip tape is a thin walled drip line used in drip irrigation. Drip tape is made of polyethylene material. It is also called as collapsible hose, once pressurized it becomes round and collapses on depressurizing. Being a flat tube it can be supplied on reels containing several thousand feet. The nominal diameter ranges from 8 to 25 lph. It can be used for surface and subsurface applications. Thin walled tapes are suitable for 2-3 seasons but can be used for longer period if used subsurface. Drip tape helps in reduction of initial investment of drip irrigation.

Polyethylene Hoses & Tubes

Polyethylene Hose and PE tubes are used as a submain / lateral pipe in micro irrigation system. These hose and tubes are UV stabilized and are able to withstand environmental effects.

Hose and Tubes are manufactured from virgin special grade polyethylene.

Range from 12 mm up to 20 mm with various length option.

Properties

Manufactured from virgin LLDPE using advanced extrusion technology.

Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.

UV stabilized.

No environmental effects.

Smooth inner surface minimizes frictional losses.